Operations Critical Action Procedures (CAPS) Practice Test

These questions are part of the practice quiz. Start practicing

• How do you measure the effectiveness of CAPS training and exercises?
• How should CAPS activities be recorded for auditability and legal defensibility?
• What is the Max Gust Factor?
• What is the maximum EGT?
• What is the primary function of a coordinating cell during inter-incident dependencies?
• What are common human factors pitfalls in CAPS execution, and how can they be mitigated?
• What is the role of risk assessment in CAPS, and how is the risk rating determined?
• Before executing a CAPS action, which verifications are required?
• Which statement is true about the operating range?
• Which practice supports maintaining situational awareness during CAPS operations?
• What is the Max Internal Fuel Weight?
• Which statement best describes the CAPS Lead's responsibilities?
• What are the key elements of an effective CAPS communication plan?
• How should change management be handled within CAPS when actions require modification?
• What is the maximum operating temperature?
• How should CAPS integrate with business continuity planning and disaster recovery?
• For an aircraft weighing less than 11,700 lb, what is Maneuvering Speed?
• Which practice is recommended to identify and correct miscommunication during CAPS?
• What is the maximum Gear-Extended speed?
• Which statement best describes the Normal Oil Level?
• In a CAPS operation, who leads the process and which ICS roles does it integrate with?
• During an engine failure, which action is listed first to establish controlled flight?
• What is the maximum RPM and duration in the given data?
• Which of the following is NOT a recommended CAPS communication practice?
• How do CAPS actions differ from routine SOPs?
• Which factors determine PPE requirements in CAPS actions?
• The maximum crosswind component including gusts is which value?
• Upper bound of the nominal Bus 1 & 2 voltage range?
• How should risk mitigation strategies be captured as lessons learned for CAPS?
• Which practice best reduces unauthorized access during CAPS actions?
• Which voltage reading would indicate a violation of the minimum gear extension voltage (22 V)?
• What is the Max Steady Crosswind Component ATLC?
• What is the Max Ramp Weight?
• Which temperature would exceed the upper limit if reached?
• What is the normal range for starter-generator oil temperature?
• Describe a scenario where a CAPS action leads to secondary hazards and how to mitigate.
• For ground, taxi, and flight operations with flight up to 10 minutes and torque up to 104%, the oil temperature must be within which range?
• What is the maximum allowable operating temperature?
• Which elements should CAPS communication protocol standards include?
• Loss of control prevention requires the MTS to be in which mode?
• At 25C ambient, is the device within its operating range?
• Which temperature is outside the range now?
• What is the maximum oil PX?
• What is the normal in-flight EGT range?
• What is the maximum fuel tank temperature?
• What is the maximum Starter-Generator oil temperature?
• Which range correctly describes the normal in-flight EGT?
• Describe how to maintain situational awareness during CAPS operations?
• Which statement correctly differentiates a hotwash from a debrief?
• What is the normal oil temperature range for ground and taxi operations?
• Which temperature would violate the -40C to +55C operating range?
• What defines a CAPS-safe action?
• What is the normal oil PX range?
• Which phase of the CAPS action sequence involves collecting current conditions and cues?
• What is the minimum fuel tank temperature?
• Which statement correctly describes CAPS training, certification, and drills frequency?
• What is root-cause analysis in the CAPS context, and how is it used after action?
• For an aircraft weighing less than 10,500 lb, what is Maneuvering Speed?
• Which option correctly states the Normal RPM DEEC range?
• Why are predefined message formats and external disclosure approvals essential in a CAPS communication plan?
• What is the minimum oil pressure?
• What is the purpose of a debrief in CAPS, and who should participate?
• What is the normal fuel tank temperature range?
• What is a key benefit of cross-training CAPS staff in relation to business continuity?
• What is the Max Speed on a 90+ F climb-out for 45 min?
• The emergency max landing weight is higher than the normal max landing weight.
• Which value represents the minimum acceptable oil system temperature?
• During engine fire or RPM decay on the ground, which lever position is required?
• What is the Max Landing Weight Emergency?
• What is the maximum Jet Pump Manifold PX?
• What is the AOA operating range?
• Which value represents the minimum Jet Pump Manifold PX?
• What is the minimum fuel tank temperature?
• Torque Normal is defined as which range?
• Which statement best describes the roles of CAPS Lead and CAPS Operator?
• How should CAPS handle data privacy and regulatory compliance during incident response?
• What is the maximum Gear-In-Transit speed?
• Which of the following is NOT within the normal oil temperature ranges?
• Which of the following is greater: Max Total Wind or Max Steady Crosswind Component ATLC?
• In an IT operations CAPS activation for a system outage, which sequence of steps is correct?
• What is the role of mutual aid agreements in CAPS operations?
• How should risk mitigation strategies be captured as lessons learned for CAPS (repeat lessons learned process)?
• Normal RPM DEEC range is?
• Which temperature is outside the operating range of -40C to +55C?
• What is the Never Exceed Speed in KIAS?
• What is the purpose of a debrief after a CAPS incident?
• What practice minimizes data leakage when sharing CAPS information with external stakeholders?
• What records must be maintained after a CAPS incident, and for how long?
• What is the Max Total Wind?
• Activation triggers CAPS activation, and who has the authority to initiate it?
• What is the maximum gear-extended speed?
• What is the minimum oil level percentage?
• Which temperatures are both within the range?
• What indicators trigger expansion of CAPS operations?
• How should CAPS actions be prioritized when multiple incidents occur simultaneously?
• What is a hotwash, and when is it conducted?
• Which is the correct order of the CAPS action sequence?
• What is the nominal voltage range for Bus 1 & 2?
• Describe the process for transitioning CAPS to normal operations and the demobilization criteria.
• Which action in the engine failure procedure involves selecting the landing site?
• Which practice best supports rapid service restoration strategies in CAPS?
• What is the minimum oil temperature for ground, taxi, and in-flight operations?
• What is a Situation Report (SITREP) in CAPS, and what key data should it include?
• Which temperature is outside and greater than the maximum?
• What is the minimum allowable Exhaust Gas Temperature (EGT) for operation?
• What is the purpose of an after-action review (AAR)?
• In the CAPS action sequence, which phase involves selecting a course of action?
• In the loss of control prevention procedure, what is the first action listed?
• What is the Max Crosswind Component Including Gusts ATLC?
• How are CAPS actions coordinated across multiple sites?
• What typically triggers CAPS actions?
• What is the minimum operating temperature?
• How does CAPS integrate with the Incident Command System (ICS), and where is CAPS positioned within the ICS structure?
• How should a CAPS team handle conflicting orders or commands?
• Which value is the maximum Jet Pump Manifold PX?
• Which statement defines 'critical actions' in CAPS and provides domain-specific examples?
• What are deferred actions in CAPS and when should they be deferred?
• Which of the following is the engine failure sequence item?
• Normal Oil Level is described as which range?
• What is the Max Tailwind Component?
• Which practice deconflicts CAPS actions with parallel operations and other teams on scene?
• Lower bound of the nominal Bus 1 & 2 voltage range?
• What is the maximum oil temperature for ground, taxi, and flight?
• Which parameter has a value of 10 knots?
• Torque Max is which percentage?
• Who should sign off on major decisions and what is the role of the CAPS Lead in this process?
• An observed Exhaust Gas Temperature of 660C is within the normal in-flight range?
• Describe how CAPS can be scaled from small to large incidents and what indicators indicate expansion is needed?
• What is the maximum value for the Jet Pump Manifold PX?
• What is the minimum oil system temperature?
• How should decisions be documented (decision log) and who should sign off?
• During Takeoff Abort, which action is listed after the other?
• In a field operations CAPS activation for a security breach, what are the correct steps?
• How should CAPS actions be documented during execution, and what is the expected time cadence for log updates?
• What is the primary objective of CAPS in an operational environment?
• How is the risk rating determined in CAPS?
• What is the difference between 'capable' and 'capable with constraints' in the context of resources?
• What is the Max Landing Weight Normal?
• In total downlink failure below 2000 AGL or on the ground, what should be done to the uplink/command link?
• What elements should be included in a CAPS runbook?
• What is the purpose of a CAPS checklist and when should it be used?
• Which of the following temperatures is inside the operating range?
• What should be captured in a decision log to ensure traceability?
• What measures help ensure reliable timestamps and data integrity in CAPS documentation?
• What is the minimum Jet Pump Manifold PX?
• Which description best defines an immutable log in CAPS operations?
• What is the normal oil temperature range during flight?
• What is the normal oil temperature range for the starter-generator?
• Which item is NOT part of pre-staged resources for CAPS readiness?
• In CAPS, which description best captures the impact of tone and leadership behavior on execution?
• Which statement best describes the CAPS checklist?
• What is the minimum gear extension voltage?
• Which items should be pre-staged for CAPS readiness?
• What is the normal Jet Pump Manifold PX range?
• What is the maximum allowable voltage for Bus 1 & 2?
• Which temperature is within the operating range of -40C to +55C?
• In Min-AGM-114 Operations, the minimum value is greater than which percentage?
• The maximum internal fuel weight is which of the following?
• What action is taken during a takeoff abort?
• What are the typical metrics used to evaluate CAPS performance during an incident?
• How should CAPS ensure continuity of critical services during an incident?
• In a CAPS scenario, how should resource requests be framed and escalated?
• What is the importance of after-action review in CAPS, and what steps does it include?
• Which temperature is exactly the lower limit?
• Which temperature is outside the range?